Factory made hot-sale Boiler Accessory - SHF Coal Water Slury Steam Boiler – Double Rings
Factory made hot-sale Boiler Accessory - SHF Coal Water Slury Steam Boiler – Double Rings Detail:
Introduction:
As a new type of mature high-performance with low-pollution clean coal technology.
circulating fluidized bed combustion(CFBC)technology is unlike others that it has a lot of unique characteristics.
1. Circulating fluidized bed is of low-temperature combustion, therefore nitrogen oxides emissions of such boiler is much lower than that of coal-powder boiler, and such boiler could directly desulfurize during combustion process. Circulating fluidized bed boiler with high desulfurization rate is economical.
2. Circulating fluidized bed boiler could adopt various coal types and has high combustion efficiency, which is especially suitable for low quality, low calorific value coal.
3.The ash of circulating fluidized bed boiler is of high activity, thus it is easy to realize comprehensive utilization without secondary pollution.
4.Circulating fluidized bed boiler could adjust its load in a wide range. Lowest load can be reduced to 30% Of full capacity.
Our recommendation—the of low magnification circulating fluidized bed boiler products have completely solved the problems like boiler abrasion, slagging and ash blocking of feed recycle device.original emission concentration of boiler and deslagging. Now the requirement on environmental protection is increasingly strict.As raw coal’s proportion of direct-fired is high. which makes the contradiction between coal and environmental protection more and more acute. Under such background, circulating fluidized bed boiler with the features of environmental protection and energy saving is your best choice.
Quality Control
| 1 | Strength Calculation Report for Applied Materials after Inspection Machine inspected. |
| 2 | 100%NDT(non-destructive inspection) report of steel plate,tube and welding rod; |
| 3 | 100% X-ray inspection report (welding seam):to ensure the quality of the entire boiler; |
| 4 | Hydraulic test report:ensure the standard working pressure and safety; |
| 5 | Third-party inspection report:by Special Equipment Safety Supervision Inspection Institute of Jiang Su Province |
| 6 | Manufacturer Produce Level Grade-A. Product Reach European Standard CE Marks. |
Inspection Machinery for the Boiler in Workshop and Laboratory :
| No. | Name | Model | Qty |
| 1 | Digital Carbon & Sulfur Analysis Meter | HV-4B | 1set |
| 2 | High Speed Self-Ignition Furnace | HB-2H | 1set |
| 3 | Electric Scale | JA1003 | 1set |
| 4 | Photometer | 723 | 1set |
| 5 | Metallography Scale | XJB-2A | 1set |
| 6 | Hydraulic Multi-propose Test Machinery | WE-100 | 1set |
| 7 | WE-600A | 1set | |
| 8 | Concussion Testing Machine | JB-30 | 1set |
| 9 | Projective Meter | JS | 1set |
| 10 | X Ray Crack Detector | XXH3005 | 1set |
| 11 | XXH2505 XXXXH23005 | 2sets | |
| 12 | XY2515 | 2sets | |
| 13 | Ultrasonic Crack Detector | CTS-22 | 2sets |
Product detail pictures:
Related Product Guide:
Boiler Structure
We are experienced manufacturer. Wining the majority from the crucial certifications of its market for Factory made hot-sale Boiler Accessory - SHF Coal Water Slury Steam Boiler – Double Rings , The product will supply to all over the world, such as: Cannes, Uganda, Cologne, We follow up the career and aspiration of our elder generation, and we're eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have now a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
By Madeline from Latvia - 2018.09.23 18:44
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Bess from Thailand - 2018.12.11 11:26
Related products
-
Best quality Boiler Manufacturers - Boiler Wat...
Used in Boiler Tank accessories (1) Water inlet pipe: The water inlet pipe of the water tank is generally connected from the side wall, but it can also be connected from the bottom or top. When the water tank USES the pipe network pressure to fill the water, the inlet pipe outlet should be equipped with a floating ball valve or hydraulic valve. Generally, there are not less than 2 floating ball valves. The diameter of the ball float valve is the same as that of the inlet pipe, and each ...
-
Factory wholesale Steam Boiler Manufacturer - ...
Introduction : SZS series boiler body is longitudinal 2-drum, D-type chamber combustion strueture. The furnace is on right side and the convection bank tube is on left side. The body is fixed on the body chassis by flexible supports in the middle and two ends of the lower drum,can secure to let the whole boiler body to expand sideways. Surround furnace there are narrow space membrane cooling tube wall. It is totally sealed and separated between the membrane wall on furnace left side and the c...
-
China Electric Steam Boilers Manufacturers - B...
Used in Boiler Introduction The sub-cylinder is the main supporting equipment of the boiler. It is used to distribute the steam generated during the operation of the boiler to various pipelines. The sub-cylinder is a pressure-bearing equipment and belongs to a pressure vessel. Its pressure-bearing capacity and capacity should correspond to the supporting boiler . Main pressure components The main pressure components of the sub-cylinder are: head, shell material, etc. Usage The sub-cylin...
-
Thermal Oil Boiler - LPG Pressure Tank –...
Introduction: Pressure vessel equipment plays an important role in the petrochemical industry, the energy industry, scientific research and military sectors etc. Pressure vessel container body consist of cylinder, sealing head, flange, sealing elements, open pore and connected pipe, bearing. In addition, also equipped with safety devices, meter and safety internals for protection purpose . Pressure Vessel Main Performance Parameter List Steam Pressure1.0Mpa Inlet Temperature 250℃ S...
-
Best Price on Industrial Biomass Boiler - Elec...
Introduction: Pressure Vessel Main Performance Parameter List Steam Pressure1.0Mpa Inlet Temperature 250℃ Saturation Temperature 179℃ Heating Water：Inlet Temperature 90℃； Outlet Temperature 140℃ Feature Fully automatic operation can be realized by a digital controller switch Control system selected advanced programmable controller, heating element input sequence can be realized the timing automatically switches to extend component life With automatic sewage With automatic wa...
-
New Fashion Design for Commercial Biomass Boile...
More phtos The patent material RTSiCr，RQTSi4Mo which is our company’s unique material. High temperature resistance, Special process, longer service life. Travelling type grate stoker Spare Parts—Grate Bar The structure is simple, the metal consumption is small, the ventilation section ratio is large, and the strength and performance requirements of the driving shaft, the driven shaft and the grate are high.
