Gas Thermal Oil Boiler Manufacturers - Gas Oil Thermal Oil Boiler – Double Rings
Gas Thermal Oil Boiler Manufacturers - Gas Oil Thermal Oil Boiler – Double Rings Detail:
Introduction
The gas-fired Thermol Oil Boiler uses a closed cycle for heat supply and liquid phase transport of heat energy, which has the characteristics of less heat loss, and effectively prolongs the life of the boiler, energy saving and environmental protection. The inside of the furnace adopts a three-circuit tube design and a direct flow structure to ensure the safety of the boiler and effectively extend the service life of the boiler. The coil structure increases the heating surface and has the characteristics of high thermal efficiency. The gas-fired heat-conducting oil boiler adopts countercurrent heat exchange, and the temperature difference between the combustion exhaust temperature and the heat-conducting oil outlet temperature is below 35 ℃. It can work in a lower pressure environment and can reach a working temperature below 450 ℃ to achieve low pressure and high temperature. Now it is widely used in petroleum, chemical, printing and dyeing industries.
Feature
1. Low pressure and high temperature, energy saving, environmental protection, high efficiency and safety.
2. It has safe and reliable operation control and safety monitoring devices, which can accurately control the operating temperature.
3. The structure is scientific and reasonable, the supporting facilities are complete, the installation time is short, and the operation is convenient.
4. It adopts advanced explosion-proof structure, which is suitable for explosion-proof in zone Ⅱ of the factory, and the explosion-proof level can reach C level.
Product detail pictures:
Related Product Guide:
Boiler Structure
We'll make each hard work to become excellent and excellent, and speed up our measures for standing from the rank of intercontinental top-grade and high-tech enterprises for Gas Thermal Oil Boiler Manufacturers - Gas Oil Thermal Oil Boiler – Double Rings , The product will supply to all over the world, such as: Australia, Honduras, Manchester, Customer's satisfaction is always our quest, creating value for customers is always our duty, a long term mutual-beneficial business relationship is what we are doing for. We are an absolutely reliable partner for you in China. Of course, other services, like consulting, can be offered too.
By Mavis from Morocco - 2018.05.15 10:52
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Martin Tesch from Croatia - 2017.04.18 16:45
Related products
-
China Biomass Pellet Boiler Suppliers - Single...
Parameter : DZG（L）Bearing Pressure Hot water boiler Main Technology Parameter List Model DZG0.7-0.7/95/70 DZL0.7-0.7/95/70 DZG1.4-0.7/95/70 DZL1.4-0.7/95/70 DZL1.4-1.0/115/70 DZL28-1.0/115/70 DZL2.8-1.25/130/70 DZL4.2-1.0/115/70 DZL4.2-1.25/130/70 Rated Capacity T/h 0.7 1.4 2.8 4.2 Rated Working Pressure Mpa 0.7 0.7/1.0 1.0/1.25 1.0/1.25 Rated Steam Temp. ℃ 95 95/115 115/130 115/130 Feed Water Temp. ℃ 70 70 70 70 Fuel Consumption Kg/H ~150 ~310 ~590 ~900 Thermal Efficiency ...
-
China Fuel Boiler - Coal Boiler Biomass Boiler...
I.D fan used in Coal Boiler boiler induced draft fan is designed for the industrial boiler (1-20T / h) or domestic boiler equipped with various coal quality and smoke and dust removal device. It can be selected for the same air inlet conditions and performance, but the high temperature is ≤ 250 ℃. Before induced draft, a dust removal device with efficiency ≤ 85% must be installed to ensure that the dust content of flue gas entering the fan is 400mg/m3
-
Gas Steam Boiler Factories - Boiler Steam Dist...
Used in Boiler Introduction The sub-cylinder is the main supporting equipment of the boiler. It is used to distribute the steam generated during the operation of the boiler to various pipelines. The sub-cylinder is a pressure-bearing equipment and belongs to a pressure vessel. Its pressure-bearing capacity and capacity should correspond to the supporting boiler . Main pressure components The main pressure components of the sub-cylinder are: head, shell material, etc. Usage The sub-cylin...
-
Newly Arrival High Efficiency Gas Boiler - Boi...
Used in Boiler Tank accessories (1) Water inlet pipe: The water inlet pipe of the water tank is generally connected from the side wall, but it can also be connected from the bottom or top. When the water tank USES the pipe network pressure to fill the water, the inlet pipe outlet should be equipped with a floating ball valve or hydraulic valve. Generally, there are not less than 2 floating ball valves. The diameter of the ball float valve is the same as that of the inlet pipe, and each ...
-
Super Lowest Price Oil Fueled Boiler - Steam&a...
Products Description Structure Steel pipe– insulation layer–steel jacket pipe Steel pipe process 1. Seamless, 2. Spiral steel pipe( SAW) 3. Straight steel pipe(ERW） Insulation layer of external sliding type Fiberglass wool or rock wool Insulation layer of internal sliding type 1. Calcium silicate insulation material 2. Polyurethane insulation material Application 1. Steam 2. Hot oil 3. Hot material Specification DN57-1020mm(1 inch-64 inch) Medium temperature...
-
Reasonable price for Oil Fired Boilers - Boile...
More Photos Boiler Steel Pipe/Tube is a kind of seamless steel pipe. The manufacturing method is the same as seamless steel pipes, but there are strict requirements for the steel grades used to manufacture boiler steel pipes. According to the temperature level, it is divided into two types: low pressure boiler tube and high pressure boiler tube.
